Portable Truck Scales

HighlightsWith 4x ramps, incl. delivery, assembly and calibration of the scales. Technical DataType:HE-TS 06Bridge size: 6.00 x 3.00 mDrive-on height: < 300 mmLoad capacity: according to DIN 8119Maximum load: 30.00 tVerifiable weighing range: 0.2 - 30.00 tDigit increment: 0.01 tAccuracy, calibratable: Class III, ≤+/- 0.05 % F.S.Overload protection: 200 %Outdoor protection class: IP66 and IP68/IP69KOperating temperature range: - 40 ... +80°C The HE-TS electro-mechanical truck scale is a modular system with an extremely flat design and complies with DIN standards, the regulations of the Physikalisch-Technische Bundesanstalt (PTB) and the OIML recommendations. Scale constructionThe scale is a solid welded steel construction consisting of weighing, lane and four ramp modules.The total weight of the truck scale is very low, with the heaviest component weighing approximately 1000 kg. For this reason, the complete scale can be easily assembled using a forklift or telehandler. The scale is therefore ideal for mobile use or for use in hard-to-reach installation locations.The weighing module is a compact design consisting of two base plates connected by rectangular tubes. Two shock absorbers and two anti-lift devices are integrated into each weighing module. Two additional screws are provided for transport safety. The bumper system requires no readjustment and is wear-free.When installing the weighing modules, the base plates are fixed to the floor using anchor bolts. The fixing material and shims for height compensation of 2 cm are included in the scope of delivery.The roadway module is a construction made of support profiles and sheet metal flame-cut parts that are welded together to form a composite structure. The bridge decks are bolted to the weighing modules and thus form a 950 mm wide deck on each side of the scale.Maintenance openings on the sides allow easy access to the load cells and load application points after installation, making maintenance simple.The lanes and ramps are painted with a primer and top coat (azure blue), the weighing module is hot-dip galvanized. Order processingOrder processing includes in particular Order clarification, order management, system configuration, system integration and testing of the scope of delivery in our company, Arrangement and reservation of the calibration date, Provision of the calibration vehicle for adjustment and calibration.The complete system is set up and tested by Essmann Waagen. All devices are fully configured. The system is set up according to the requirements.Installation and commissioningInstallation and commissioning include Delivery of the complete scale free to the installation site, Assembly of the scale, installation of the device, device connection, Device and system test, Adjustment and manufacturer's calibration of the scale, Instruction in operation following device installation and trial operation. Not included in the scope of delivery and services: Any necessary leveling of the paved, concrete or asphalt surface if it is uneven and has height differences (required ground pressure = 14 kg/cm², max. height deviations = +/- 2 cm). Provision of a forklift truck or similar with driver (load capacity min. 1000 kg) for unloading and installing the scales. Delivery and laying of the protective conduits (incl. pull wire) for the measuring, signal and data lines between the devices. Delivery and laying of the measuring, signal and data lines for distances over approx. 20 m, network connections (active/passive) and installation inside buildings. Connection of 230 V supply voltage to the devices.If you need assistance with project planning, please contact us. We take sufficient time for consultation and every individual request in order to find a solution tailored to your needs.You can reach us by telephone on: +49 40 84 000 410 Monday - Friday: 08:30 - 17:00 by e-mail at: [email protected]

HighlightsWith 4x ramps, incl. delivery, assembly and calibration of the scales. Technical DataType:HE-TS 06Bridge size: 6.00 x 3.00 mDrive-on height: < 300 mmLoad capacity: according to DIN 8119Maximum load: 30.00 tVerifiable weighing range: 0.2 - 30.00 tDigit increment: 0.01 tAccuracy, calibratable: Class III, ≤+/- 0.05 % F.S.Overload protection: 200 %Outdoor protection class: IP66 and IP68/IP69KOperating temperature range: - 40 ... +80°C The HE-TS electro-mechanical truck scale is a modular system with an extremely flat design and complies with DIN standards, the regulations of the Physikalisch-Technische Bundesanstalt (PTB) and the OIML recommendations. Scale constructionThe scale is a solid welded steel construction consisting of weighing, lane and four ramp modules.The total weight of the truck scale is very low, with the heaviest component weighing approximately 1000 kg. For this reason, the complete scale can be easily assembled using a forklift or telehandler. The scale is therefore ideal for mobile use or for use in hard-to-reach installation locations.The weighing module is a compact design consisting of two base plates connected by rectangular tubes. Two shock absorbers and two anti-lift devices are integrated into each weighing module. Two additional screws are provided for transport safety. The bumper system requires no readjustment and is wear-free.When installing the weighing modules, the base plates are fixed to the floor using anchor bolts. The fixing material and shims for height compensation of 2 cm are included in the scope of delivery.The roadway module is a construction made of support profiles and sheet metal flame-cut parts that are welded together to form a composite structure. The bridge decks are bolted to the weighing modules and thus form a 950 mm wide deck on each side of the scale.Maintenance openings on the sides allow easy access to the load cells and load application points after installation, making maintenance simple.The lanes and ramps are painted with a primer and top coat (azure blue), the weighing module is hot-dip galvanized. Order processingOrder processing includes in particular Order clarification, order management, system configuration, system integration and testing of the scope of delivery in our company, Arrangement and reservation of the calibration date, Provision of the calibration vehicle for adjustment and calibration.The complete system is set up and tested by Essmann Waagen. All devices are fully configured. The system is set up according to the requirements.Installation and commissioningInstallation and commissioning include Delivery of the complete scale free to the installation site, Assembly of the scale, installation of the device, device connection, Device and system test, Adjustment and manufacturer's calibration of the scale, Instruction in operation following device installation and trial operation. Not included in the scope of delivery and services: Any necessary leveling of the paved, concrete or asphalt surface if it is uneven and has height differences (required ground pressure = 14 kg/cm², max. height deviations = +/- 2 cm). Provision of a forklift truck or similar with driver (load capacity min. 1000 kg) for unloading and installing the scales. Delivery and laying of the protective conduits (incl. pull wire) for the measuring, signal and data lines between the devices. Delivery and laying of the measuring, signal and data lines for distances over approx. 20 m, network connections (active/passive) and installation inside buildings. Connection of 230 V supply voltage to the devices.If you need assistance with project planning, please contact us. We take sufficient time for consultation and every individual request in order to find a solution tailored to your needs.You can reach us by telephone on: +49 40 84 000 410 Monday - Friday: 08:30 - 17:00 by e-mail at: [email protected]

HighlightsWith 4x ramps, incl. delivery, assembly and calibration of the scales. Technical DataType:HE-TS 06Bridge size: 6.00 x 3.00 mDrive-on height: < 300 mmLoad capacity: according to DIN 8119Maximum load: 30.00 tVerifiable weighing range: 0.2 - 30.00 tDigit increment: 0.01 tAccuracy, calibratable: Class III, ≤+/- 0.05 % F.S.Overload protection: 200 %Outdoor protection class: IP66 and IP68/IP69KOperating temperature range: - 40 ... +80°C The HE-TS electro-mechanical truck scale is a modular system with an extremely flat design and complies with DIN standards, the regulations of the Physikalisch-Technische Bundesanstalt (PTB) and the OIML recommendations. Scale constructionThe scale is a solid welded steel construction consisting of weighing, lane and four ramp modules.The total weight of the truck scale is very low, with the heaviest component weighing approximately 1000 kg. For this reason, the complete scale can be easily assembled using a forklift or telehandler. The scale is therefore ideal for mobile use or for use in hard-to-reach installation locations.The weighing module is a compact design consisting of two base plates connected by rectangular tubes. Two shock absorbers and two anti-lift devices are integrated into each weighing module. Two additional screws are provided for transport safety. The bumper system requires no readjustment and is wear-free.When installing the weighing modules, the base plates are fixed to the floor using anchor bolts. The fixing material and shims for height compensation of 2 cm are included in the scope of delivery.The roadway module is a construction made of support profiles and sheet metal flame-cut parts that are welded together to form a composite structure. The bridge decks are bolted to the weighing modules and thus form a 950 mm wide deck on each side of the scale.Maintenance openings on the sides allow easy access to the load cells and load application points after installation, making maintenance simple.The lanes and ramps are painted with a primer and top coat (azure blue), the weighing module is hot-dip galvanized. Order processingOrder processing includes in particular Order clarification, order management, system configuration, system integration and testing of the scope of delivery in our company, Arrangement and reservation of the calibration date, Provision of the calibration vehicle for adjustment and calibration.The complete system is set up and tested by Essmann Waagen. All devices are fully configured. The system is set up according to the requirements.Installation and commissioningInstallation and commissioning include Delivery of the complete scale free to the installation site, Assembly of the scale, installation of the device, device connection, Device and system test, Adjustment and manufacturer's calibration of the scale, Instruction in operation following device installation and trial operation. Not included in the scope of delivery and services: Any necessary leveling of the paved, concrete or asphalt surface if it is uneven and has height differences (required ground pressure = 14 kg/cm², max. height deviations = +/- 2 cm). Provision of a forklift truck or similar with driver (load capacity min. 1000 kg) for unloading and installing the scales. Delivery and laying of the protective conduits (incl. pull wire) for the measuring, signal and data lines between the devices. Delivery and laying of the measuring, signal and data lines for distances over approx. 20 m, network connections (active/passive) and installation inside buildings. Connection of 230 V supply voltage to the devices.If you need assistance with project planning, please contact us. We take sufficient time for consultation and every individual request in order to find a solution tailored to your needs.You can reach us by telephone on: +49 40 84 000 410 Monday - Friday: 08:30 - 17:00 by e-mail at: [email protected]

HighlightsWith 4x ramps, incl. delivery, assembly and calibration of the scales. Technical DataType:HE-TS 06Bridge size: 6.00 x 3.00 mDrive-on height: < 300 mmLoad capacity: according to DIN 8119Maximum load: 30.00 tVerifiable weighing range: 0.2 - 30.00 tDigit increment: 0.01 tAccuracy, calibratable: Class III, ≤+/- 0.05 % F.S.Overload protection: 200 %Outdoor protection class: IP66 and IP68/IP69KOperating temperature range: - 40 ... +80°C The HE-TS electro-mechanical truck scale is a modular system with an extremely flat design and complies with DIN standards, the regulations of the Physikalisch-Technische Bundesanstalt (PTB) and the OIML recommendations. Scale constructionThe scale is a solid welded steel construction consisting of weighing, lane and four ramp modules.The total weight of the truck scale is very low, with the heaviest component weighing approximately 1000 kg. For this reason, the complete scale can be easily assembled using a forklift or telehandler. The scale is therefore ideal for mobile use or for use in hard-to-reach installation locations.The weighing module is a compact design consisting of two base plates connected by rectangular tubes. Two shock absorbers and two anti-lift devices are integrated into each weighing module. Two additional screws are provided for transport safety. The bumper system requires no readjustment and is wear-free.When installing the weighing modules, the base plates are fixed to the floor using anchor bolts. The fixing material and shims for height compensation of 2 cm are included in the scope of delivery.The roadway module is a construction made of support profiles and sheet metal flame-cut parts that are welded together to form a composite structure. The bridge decks are bolted to the weighing modules and thus form a 950 mm wide deck on each side of the scale.Maintenance openings on the sides allow easy access to the load cells and load application points after installation, making maintenance simple.The lanes and ramps are painted with a primer and top coat (azure blue), the weighing module is hot-dip galvanized. Order processingOrder processing includes in particular Order clarification, order management, system configuration, system integration and testing of the scope of delivery in our company, Arrangement and reservation of the calibration date, Provision of the calibration vehicle for adjustment and calibration.The complete system is set up and tested by Essmann Waagen. All devices are fully configured. The system is set up according to the requirements.Installation and commissioningInstallation and commissioning include Delivery of the complete scale free to the installation site, Assembly of the scale, installation of the device, device connection, Device and system test, Adjustment and manufacturer's calibration of the scale, Instruction in operation following device installation and trial operation. Not included in the scope of delivery and services: Any necessary leveling of the paved, concrete or asphalt surface if it is uneven and has height differences (required ground pressure = 14 kg/cm², max. height deviations = +/- 2 cm). Provision of a forklift truck or similar with driver (load capacity min. 1000 kg) for unloading and installing the scales. Delivery and laying of the protective conduits (incl. pull wire) for the measuring, signal and data lines between the devices. Delivery and laying of the measuring, signal and data lines for distances over approx. 20 m, network connections (active/passive) and installation inside buildings. Connection of 230 V supply voltage to the devices.If you need assistance with project planning, please contact us. We take sufficient time for consultation and every individual request in order to find a solution tailored to your needs.You can reach us by telephone on: +49 40 84 000 410 Monday - Friday: 08:30 - 17:00 by e-mail at: [email protected]

HighlightsWith 4x ramps, incl. delivery, assembly and calibration of the scales. Technical DataType:HE-TS 10Bridge size: 10.00 x 3.00 mDrive-on height: < 300 mmLoad capacity: according to DIN 8119Maximum load: 30.00 tVerifiable weighing range: 0.2 - 30.00 tDigit increment: 0.01 tAccuracy, calibratable: Class III, ≤+/- 0.05 % F.S.Overload protection: 200 %Outdoor protection class: IP66 and IP68/IP69KOperating temperature range: - 40 ... +80°C The HE-TS electro-mechanical truck scale is a modular system with an extremely flat design and complies with DIN standards, the regulations of the Physikalisch-Technische Bundesanstalt (PTB) and the OIML recommendations. Scale constructionThe scale is a solid welded steel construction consisting of weighing, lane and four ramp modules.The total weight of the truck scale is very low, with the heaviest component weighing approximately 1000 kg. For this reason, the complete scale can be easily assembled using a forklift or telehandler. The scale is therefore ideal for mobile use or for use in hard-to-reach installation locations.The weighing module is a compact design consisting of two base plates connected by rectangular tubes. Two shock absorbers and two anti-lift devices are integrated into each weighing module. Two additional screws are provided for transport safety. The bumper system requires no readjustment and is wear-free.When installing the weighing modules, the base plates are fixed to the floor using anchor bolts. The fixing material and shims for height compensation of 2 cm are included in the scope of delivery.The roadway module is a construction made of support profiles and sheet metal flame-cut parts that are welded together to form a composite structure. The bridge decks are bolted to the weighing modules and thus form a 950 mm wide deck on each side of the scale.Maintenance openings on the sides allow easy access to the load cells and load application points after installation, making maintenance simple.The lanes and ramps are painted with a primer and top coat (azure blue), the weighing module is hot-dip galvanized. Order processingOrder processing includes in particular Order clarification, order management, system configuration, system integration and testing of the scope of delivery in our company, Arrangement and reservation of the calibration date, Provision of the calibration vehicle for adjustment and calibration.The complete system is set up and tested by Essmann Waagen. All devices are fully configured. The system is set up according to the requirements.Installation and commissioningInstallation and commissioning include Delivery of the complete scale free to the installation site, Assembly of the scale, installation of the device, device connection, Device and system test, Adjustment and manufacturer's calibration of the scale, Instruction in operation following device installation and trial operation. Not included in the scope of delivery and services: Any necessary leveling of the paved, concrete or asphalt surface if it is uneven and has height differences (required ground pressure = 14 kg/cm², max. height deviations = +/- 2 cm). Provision of a forklift truck or similar with driver (load capacity min. 1000 kg) for unloading and installing the scales. Delivery and laying of the protective conduits (incl. pull wire) for the measuring, signal and data lines between the devices. Delivery and laying of the measuring, signal and data lines for distances over approx. 20 m, network connections (active/passive) and installation inside buildings. Connection of 230 V supply voltage to the devices.If you need assistance with project planning, please contact us. We take sufficient time for consultation and every individual request in order to find a solution tailored to your needs.You can reach us by telephone on: +49 40 84 000 410 Monday - Friday: 08:30 - 17:00 by e-mail at: [email protected]

HighlightsWith 4x ramps, incl. delivery, assembly and calibration of the scales. Technical DataType:HE-TS 8Bridge size: 8.00 x 3.00 mDrive-on height: < 300 mmLoad capacity: according to DIN 8119Maximum load: 30.00 tVerifiable weighing range: 0.2 - 30.00 tDigit increment: 0.01 tAccuracy, calibratable: Class III, ≤+/- 0.05 % F.S.Overload protection: 200 %Outdoor protection class: IP66 and IP68/IP69KOperating temperature range: - 40 ... +80°C The HE-TS electro-mechanical truck scale is a modular system with an extremely flat design and complies with DIN standards, the regulations of the Physikalisch-Technische Bundesanstalt (PTB) and the OIML recommendations. Scale constructionThe scale is a solid welded steel construction consisting of weighing, lane and four ramp modules.The total weight of the truck scale is very low, with the heaviest component weighing approximately 1000 kg. For this reason, the complete scale can be easily assembled using a forklift or telehandler. The scale is therefore ideal for mobile use or for use in hard-to-reach installation locations.The weighing module is a compact design consisting of two base plates connected by rectangular tubes. Two shock absorbers and two anti-lift devices are integrated into each weighing module. Two additional screws are provided for transport safety. The bumper system requires no readjustment and is wear-free.When installing the weighing modules, the base plates are fixed to the floor using anchor bolts. The fixing material and shims for height compensation of 2 cm are included in the scope of delivery.The roadway module is a construction made of support profiles and sheet metal flame-cut parts that are welded together to form a composite structure. The bridge decks are bolted to the weighing modules and thus form a 950 mm wide deck on each side of the scale.Maintenance openings on the sides allow easy access to the load cells and load application points after installation, making maintenance simple.The lanes and ramps are painted with a primer and top coat (azure blue), the weighing module is hot-dip galvanized. Order processingOrder processing includes in particular Order clarification, order management, system configuration, system integration and testing of the scope of delivery in our company, Arrangement and reservation of the calibration date, Provision of the calibration vehicle for adjustment and calibration.The complete system is set up and tested by Essmann Waagen. All devices are fully configured. The system is set up according to the requirements.Installation and commissioningInstallation and commissioning include Delivery of the complete scale free to the installation site, Assembly of the scale, installation of the device, device connection, Device and system test, Adjustment and manufacturer's calibration of the scale, Instruction in operation following device installation and trial operation. Not included in the scope of delivery and services: Any necessary leveling of the paved, concrete or asphalt surface if it is uneven and has height differences (required ground pressure = 14 kg/cm², max. height deviations = +/- 2 cm). Provision of a forklift truck or similar with driver (load capacity min. 1000 kg) for unloading and installing the scales. Delivery and laying of the protective conduits (incl. pull wire) for the measuring, signal and data lines between the devices. Delivery and laying of the measuring, signal and data lines for distances over approx. 20 m, network connections (active/passive) and installation inside buildings. Connection of 230 V supply voltage to the devices.If you need assistance with project planning, please contact us. We take sufficient time for consultation and every individual request in order to find a solution tailored to your needs.You can reach us by telephone on: +49 40 84 000 410 Monday - Friday: 08:30 - 17:00 by e-mail at: [email protected]

HighlightsWith 4x ramps, incl. delivery, assembly and calibration of the scales. Technical DataType:HE-TS 10Bridge size: 10.00 x 3.00 mDrive-on height: < 300 mmLoad capacity: according to DIN 8119Maximum load: 30.00 tVerifiable weighing range: 0.2 - 30.00 tDigit increment: 0.01 tAccuracy, calibratable: Class III, ≤+/- 0.05 % F.S.Overload protection: 200 %Outdoor protection class: IP66 and IP68/IP69KOperating temperature range: - 40 ... +80°C The HE-TS electro-mechanical truck scale is a modular system with an extremely flat design and complies with DIN standards, the regulations of the Physikalisch-Technische Bundesanstalt (PTB) and the OIML recommendations. Scale constructionThe scale is a solid welded steel construction consisting of weighing, lane and four ramp modules.The total weight of the truck scale is very low, with the heaviest component weighing approximately 1000 kg. For this reason, the complete scale can be easily assembled using a forklift or telehandler. The scale is therefore ideal for mobile use or for use in hard-to-reach installation locations.The weighing module is a compact design consisting of two base plates connected by rectangular tubes. Two shock absorbers and two anti-lift devices are integrated into each weighing module. Two additional screws are provided for transport safety. The bumper system requires no readjustment and is wear-free.When installing the weighing modules, the base plates are fixed to the floor using anchor bolts. The fixing material and shims for height compensation of 2 cm are included in the scope of delivery.The roadway module is a construction made of support profiles and sheet metal flame-cut parts that are welded together to form a composite structure. The bridge decks are bolted to the weighing modules and thus form a 950 mm wide deck on each side of the scale.Maintenance openings on the sides allow easy access to the load cells and load application points after installation, making maintenance simple.The lanes and ramps are painted with a primer and top coat (azure blue), the weighing module is hot-dip galvanized. Order processingOrder processing includes in particular Order clarification, order management, system configuration, system integration and testing of the scope of delivery in our company, Arrangement and reservation of the calibration date, Provision of the calibration vehicle for adjustment and calibration.The complete system is set up and tested by Essmann Waagen. All devices are fully configured. The system is set up according to the requirements.Installation and commissioningInstallation and commissioning include Delivery of the complete scale free to the installation site, Assembly of the scale, installation of the device, device connection, Device and system test, Adjustment and manufacturer's calibration of the scale, Instruction in operation following device installation and trial operation. Not included in the scope of delivery and services: Any necessary leveling of the paved, concrete or asphalt surface if it is uneven and has height differences (required ground pressure = 14 kg/cm², max. height deviations = +/- 2 cm). Provision of a forklift truck or similar with driver (load capacity min. 1000 kg) for unloading and installing the scales. Delivery and laying of the protective conduits (incl. pull wire) for the measuring, signal and data lines between the devices. Delivery and laying of the measuring, signal and data lines for distances over approx. 20 m, network connections (active/passive) and installation inside buildings. Connection of 230 V supply voltage to the devices.If you need assistance with project planning, please contact us. We take sufficient time for consultation and every individual request in order to find a solution tailored to your needs.You can reach us by telephone on: +49 40 84 000 410 Monday - Friday: 08:30 - 17:00 by e-mail at: [email protected]

HighlightsWith 4x ramps, incl. delivery, assembly and calibration of the scales. Technical DataType:HE-TS 06Bridge size: 6.00 x 3.00 mDrive-on height: < 300 mmLoad capacity: according to DIN 8119Maximum load: 30.00 tVerifiable weighing range: 0.2 - 30.00 tDigit increment: 0.01 tAccuracy, calibratable: Class III, ≤+/- 0.05 % F.S.Overload protection: 200 %Outdoor protection class: IP66 and IP68/IP69KOperating temperature range: - 40 ... +80°C The HE-TS electro-mechanical truck scale is a modular system with an extremely flat design and complies with DIN standards, the regulations of the Physikalisch-Technische Bundesanstalt (PTB) and the OIML recommendations. Scale constructionThe scale is a solid welded steel construction consisting of weighing, lane and four ramp modules.The total weight of the truck scale is very low, with the heaviest component weighing approximately 1000 kg. For this reason, the complete scale can be easily assembled using a forklift or telehandler. The scale is therefore ideal for mobile use or for use in hard-to-reach installation locations.The weighing module is a compact design consisting of two base plates connected by rectangular tubes. Two shock absorbers and two anti-lift devices are integrated into each weighing module. Two additional screws are provided for transport safety. The bumper system requires no readjustment and is wear-free.When installing the weighing modules, the base plates are fixed to the floor using anchor bolts. The fixing material and shims for height compensation of 2 cm are included in the scope of delivery.The roadway module is a construction made of support profiles and sheet metal flame-cut parts that are welded together to form a composite structure. The bridge decks are bolted to the weighing modules and thus form a 950 mm wide deck on each side of the scale.Maintenance openings on the sides allow easy access to the load cells and load application points after installation, making maintenance simple.The lanes and ramps are painted with a primer and top coat (azure blue), the weighing module is hot-dip galvanized. Order processingOrder processing includes in particular Order clarification, order management, system configuration, system integration and testing of the scope of delivery in our company, Arrangement and reservation of the calibration date, Provision of the calibration vehicle for adjustment and calibration.The complete system is set up and tested by Essmann Waagen. All devices are fully configured. The system is set up according to the requirements.Installation and commissioningInstallation and commissioning include Delivery of the complete scale free to the installation site, Assembly of the scale, installation of the device, device connection, Device and system test, Adjustment and manufacturer's calibration of the scale, Instruction in operation following device installation and trial operation. Not included in the scope of delivery and services: Any necessary leveling of the paved, concrete or asphalt surface if it is uneven and has height differences (required ground pressure = 14 kg/cm², max. height deviations = +/- 2 cm). Provision of a forklift truck or similar with driver (load capacity min. 1000 kg) for unloading and installing the scales. Delivery and laying of the protective conduits (incl. pull wire) for the measuring, signal and data lines between the devices. Delivery and laying of the measuring, signal and data lines for distances over approx. 20 m, network connections (active/passive) and installation inside buildings. Connection of 230 V supply voltage to the devices.If you need assistance with project planning, please contact us. We take sufficient time for consultation and every individual request in order to find a solution tailored to your needs.You can reach us by telephone on: +49 40 84 000 410 Monday - Friday: 08:30 - 17:00 by e-mail at: [email protected]

HighlightsWith 4x ramps, incl. delivery, assembly and calibration of the scales. Technical DataType:HE-TS 06Bridge size: 6.00 x 3.00 mDrive-on height: < 300 mmLoad capacity: according to DIN 8119Maximum load: 30.00 tVerifiable weighing range: 0.2 - 30.00 tDigit increment: 0.01 tAccuracy, calibratable: Class III, ≤+/- 0.05 % F.S.Overload protection: 200 %Outdoor protection class: IP66 and IP68/IP69KOperating temperature range: - 40 ... +80°C The HE-TS electro-mechanical truck scale is a modular system with an extremely flat design and complies with DIN standards, the regulations of the Physikalisch-Technische Bundesanstalt (PTB) and the OIML recommendations. Scale constructionThe scale is a solid welded steel construction consisting of weighing, lane and four ramp modules.The total weight of the truck scale is very low, with the heaviest component weighing approximately 1000 kg. For this reason, the complete scale can be easily assembled using a forklift or telehandler. The scale is therefore ideal for mobile use or for use in hard-to-reach installation locations.The weighing module is a compact design consisting of two base plates connected by rectangular tubes. Two shock absorbers and two anti-lift devices are integrated into each weighing module. Two additional screws are provided for transport safety. The bumper system requires no readjustment and is wear-free.When installing the weighing modules, the base plates are fixed to the floor using anchor bolts. The fixing material and shims for height compensation of 2 cm are included in the scope of delivery.The roadway module is a construction made of support profiles and sheet metal flame-cut parts that are welded together to form a composite structure. The bridge decks are bolted to the weighing modules and thus form a 950 mm wide deck on each side of the scale.Maintenance openings on the sides allow easy access to the load cells and load application points after installation, making maintenance simple.The lanes and ramps are painted with a primer and top coat (azure blue), the weighing module is hot-dip galvanized. Order processingOrder processing includes in particular Order clarification, order management, system configuration, system integration and testing of the scope of delivery in our company, Arrangement and reservation of the calibration date, Provision of the calibration vehicle for adjustment and calibration.The complete system is set up and tested by Essmann Waagen. All devices are fully configured. The system is set up according to the requirements.Installation and commissioningInstallation and commissioning include Delivery of the complete scale free to the installation site, Assembly of the scale, installation of the device, device connection, Device and system test, Adjustment and manufacturer's calibration of the scale, Instruction in operation following device installation and trial operation. Not included in the scope of delivery and services: Any necessary leveling of the paved, concrete or asphalt surface if it is uneven and has height differences (required ground pressure = 14 kg/cm², max. height deviations = +/- 2 cm). Provision of a forklift truck or similar with driver (load capacity min. 1000 kg) for unloading and installing the scales. Delivery and laying of the protective conduits (incl. pull wire) for the measuring, signal and data lines between the devices. Delivery and laying of the measuring, signal and data lines for distances over approx. 20 m, network connections (active/passive) and installation inside buildings. Connection of 230 V supply voltage to the devices.If you need assistance with project planning, please contact us. We take sufficient time for consultation and every individual request in order to find a solution tailored to your needs.You can reach us by telephone on: +49 40 84 000 410 Monday - Friday: 08:30 - 17:00 by e-mail at: [email protected]

HighlightsWith 4x ramps, incl. delivery, assembly and calibration of the scales. Technical DataType:HE-TS 06Bridge size: 6.00 x 3.00 mDrive-on height: < 300 mmLoad capacity: according to DIN 8119Maximum load: 30.00 tVerifiable weighing range: 0.2 - 30.00 tDigit increment: 0.01 tAccuracy, calibratable: Class III, ≤+/- 0.05 % F.S.Overload protection: 200 %Outdoor protection class: IP66 and IP68/IP69KOperating temperature range: - 40 ... +80°C The HE-TS electro-mechanical truck scale is a modular system with an extremely flat design and complies with DIN standards, the regulations of the Physikalisch-Technische Bundesanstalt (PTB) and the OIML recommendations. Scale constructionThe scale is a solid welded steel construction consisting of weighing, lane and four ramp modules.The total weight of the truck scale is very low, with the heaviest component weighing approximately 1000 kg. For this reason, the complete scale can be easily assembled using a forklift or telehandler. The scale is therefore ideal for mobile use or for use in hard-to-reach installation locations.The weighing module is a compact design consisting of two base plates connected by rectangular tubes. Two shock absorbers and two anti-lift devices are integrated into each weighing module. Two additional screws are provided for transport safety. The bumper system requires no readjustment and is wear-free.When installing the weighing modules, the base plates are fixed to the floor using anchor bolts. The fixing material and shims for height compensation of 2 cm are included in the scope of delivery.The roadway module is a construction made of support profiles and sheet metal flame-cut parts that are welded together to form a composite structure. The bridge decks are bolted to the weighing modules and thus form a 950 mm wide deck on each side of the scale.Maintenance openings on the sides allow easy access to the load cells and load application points after installation, making maintenance simple.The lanes and ramps are painted with a primer and top coat (azure blue), the weighing module is hot-dip galvanized. Order processingOrder processing includes in particular Order clarification, order management, system configuration, system integration and testing of the scope of delivery in our company, Arrangement and reservation of the calibration date, Provision of the calibration vehicle for adjustment and calibration.The complete system is set up and tested by Essmann Waagen. All devices are fully configured. The system is set up according to the requirements.Installation and commissioningInstallation and commissioning include Delivery of the complete scale free to the installation site, Assembly of the scale, installation of the device, device connection, Device and system test, Adjustment and manufacturer's calibration of the scale, Instruction in operation following device installation and trial operation. Not included in the scope of delivery and services: Any necessary leveling of the paved, concrete or asphalt surface if it is uneven and has height differences (required ground pressure = 14 kg/cm², max. height deviations = +/- 2 cm). Provision of a forklift truck or similar with driver (load capacity min. 1000 kg) for unloading and installing the scales. Delivery and laying of the protective conduits (incl. pull wire) for the measuring, signal and data lines between the devices. Delivery and laying of the measuring, signal and data lines for distances over approx. 20 m, network connections (active/passive) and installation inside buildings. Connection of 230 V supply voltage to the devices.If you need assistance with project planning, please contact us. We take sufficient time for consultation and every individual request in order to find a solution tailored to your needs.You can reach us by telephone on: +49 40 84 000 410 Monday - Friday: 08:30 - 17:00 by e-mail at: [email protected]

HighlightsWith 4x ramps, incl. delivery, assembly and calibration of the scales. Technical DataType:HE-TS 06Bridge size: 6.00 x 3.00 mDrive-on height: < 300 mmLoad capacity: according to DIN 8119Maximum load: 30.00 tVerifiable weighing range: 0.2 - 30.00 tDigit increment: 0.01 tAccuracy, calibratable: Class III, ≤+/- 0.05 % F.S.Overload protection: 200 %Outdoor protection class: IP66 and IP68/IP69KOperating temperature range: - 40 ... +80°C The HE-TS electro-mechanical truck scale is a modular system with an extremely flat design and complies with DIN standards, the regulations of the Physikalisch-Technische Bundesanstalt (PTB) and the OIML recommendations. Scale constructionThe scale is a solid welded steel construction consisting of weighing, lane and four ramp modules.The total weight of the truck scale is very low, with the heaviest component weighing approximately 1000 kg. For this reason, the complete scale can be easily assembled using a forklift or telehandler. The scale is therefore ideal for mobile use or for use in hard-to-reach installation locations.The weighing module is a compact design consisting of two base plates connected by rectangular tubes. Two shock absorbers and two anti-lift devices are integrated into each weighing module. Two additional screws are provided for transport safety. The bumper system requires no readjustment and is wear-free.When installing the weighing modules, the base plates are fixed to the floor using anchor bolts. The fixing material and shims for height compensation of 2 cm are included in the scope of delivery.The roadway module is a construction made of support profiles and sheet metal flame-cut parts that are welded together to form a composite structure. The bridge decks are bolted to the weighing modules and thus form a 950 mm wide deck on each side of the scale.Maintenance openings on the sides allow easy access to the load cells and load application points after installation, making maintenance simple.The lanes and ramps are painted with a primer and top coat (azure blue), the weighing module is hot-dip galvanized. Order processingOrder processing includes in particular Order clarification, order management, system configuration, system integration and testing of the scope of delivery in our company, Arrangement and reservation of the calibration date, Provision of the calibration vehicle for adjustment and calibration.The complete system is set up and tested by Essmann Waagen. All devices are fully configured. The system is set up according to the requirements.Installation and commissioningInstallation and commissioning include Delivery of the complete scale free to the installation site, Assembly of the scale, installation of the device, device connection, Device and system test, Adjustment and manufacturer's calibration of the scale, Instruction in operation following device installation and trial operation. Not included in the scope of delivery and services: Any necessary leveling of the paved, concrete or asphalt surface if it is uneven and has height differences (required ground pressure = 14 kg/cm², max. height deviations = +/- 2 cm). Provision of a forklift truck or similar with driver (load capacity min. 1000 kg) for unloading and installing the scales. Delivery and laying of the protective conduits (incl. pull wire) for the measuring, signal and data lines between the devices. Delivery and laying of the measuring, signal and data lines for distances over approx. 20 m, network connections (active/passive) and installation inside buildings. Connection of 230 V supply voltage to the devices.If you need assistance with project planning, please contact us. We take sufficient time for consultation and every individual request in order to find a solution tailored to your needs.You can reach us by telephone on: +49 40 84 000 410 Monday - Friday: 08:30 - 17:00 by e-mail at: [email protected]

HighlightsWith 4x ramps, incl. delivery, assembly and calibration of the scales. Technical DataType:HE-TS 06Bridge size: 6.00 x 3.00 mDrive-on height: < 300 mmLoad capacity: according to DIN 8119Maximum load: 30.00 tVerifiable weighing range: 0.2 - 30.00 tDigit increment: 0.01 tAccuracy, calibratable: Class III, ≤+/- 0.05 % F.S.Overload protection: 200 %Outdoor protection class: IP66 and IP68/IP69KOperating temperature range: - 40 ... +80°C The HE-TS electro-mechanical truck scale is a modular system with an extremely flat design and complies with DIN standards, the regulations of the Physikalisch-Technische Bundesanstalt (PTB) and the OIML recommendations. Scale constructionThe scale is a solid welded steel construction consisting of weighing, lane and four ramp modules.The total weight of the truck scale is very low, with the heaviest component weighing approximately 1000 kg. For this reason, the complete scale can be easily assembled using a forklift or telehandler. The scale is therefore ideal for mobile use or for use in hard-to-reach installation locations.The weighing module is a compact design consisting of two base plates connected by rectangular tubes. Two shock absorbers and two anti-lift devices are integrated into each weighing module. Two additional screws are provided for transport safety. The bumper system requires no readjustment and is wear-free.When installing the weighing modules, the base plates are fixed to the floor using anchor bolts. The fixing material and shims for height compensation of 2 cm are included in the scope of delivery.The roadway module is a construction made of support profiles and sheet metal flame-cut parts that are welded together to form a composite structure. The bridge decks are bolted to the weighing modules and thus form a 950 mm wide deck on each side of the scale.Maintenance openings on the sides allow easy access to the load cells and load application points after installation, making maintenance simple.The lanes and ramps are painted with a primer and top coat (azure blue), the weighing module is hot-dip galvanized. Order processingOrder processing includes in particular Order clarification, order management, system configuration, system integration and testing of the scope of delivery in our company, Arrangement and reservation of the calibration date, Provision of the calibration vehicle for adjustment and calibration.The complete system is set up and tested by Essmann Waagen. All devices are fully configured. The system is set up according to the requirements.Installation and commissioningInstallation and commissioning include Delivery of the complete scale free to the installation site, Assembly of the scale, installation of the device, device connection, Device and system test, Adjustment and manufacturer's calibration of the scale, Instruction in operation following device installation and trial operation. Not included in the scope of delivery and services: Any necessary leveling of the paved, concrete or asphalt surface if it is uneven and has height differences (required ground pressure = 14 kg/cm², max. height deviations = +/- 2 cm). Provision of a forklift truck or similar with driver (load capacity min. 1000 kg) for unloading and installing the scales. Delivery and laying of the protective conduits (incl. pull wire) for the measuring, signal and data lines between the devices. Delivery and laying of the measuring, signal and data lines for distances over approx. 20 m, network connections (active/passive) and installation inside buildings. Connection of 230 V supply voltage to the devices.If you need assistance with project planning, please contact us. We take sufficient time for consultation and every individual request in order to find a solution tailored to your needs.You can reach us by telephone on: +49 40 84 000 410 Monday - Friday: 08:30 - 17:00 by e-mail at: [email protected]

HighlightsWith 4x ramps, incl. delivery, assembly and calibration of the scales. Technical DataType:HE-TS 06Bridge size: 6.00 x 3.00 mDrive-on height: < 300 mmLoad capacity: according to DIN 8119Maximum load: 30.00 tVerifiable weighing range: 0.2 - 30.00 tDigit increment: 0.01 tAccuracy, calibratable: Class III, ≤+/- 0.05 % F.S.Overload protection: 200 %Outdoor protection class: IP66 and IP68/IP69KOperating temperature range: - 40 ... +80°C The HE-TS electro-mechanical truck scale is a modular system with an extremely flat design and complies with DIN standards, the regulations of the Physikalisch-Technische Bundesanstalt (PTB) and the OIML recommendations. Scale constructionThe scale is a solid welded steel construction consisting of weighing, lane and four ramp modules.The total weight of the truck scale is very low, with the heaviest component weighing approximately 1000 kg. For this reason, the complete scale can be easily assembled using a forklift or telehandler. The scale is therefore ideal for mobile use or for use in hard-to-reach installation locations.The weighing module is a compact design consisting of two base plates connected by rectangular tubes. Two shock absorbers and two anti-lift devices are integrated into each weighing module. Two additional screws are provided for transport safety. The bumper system requires no readjustment and is wear-free.When installing the weighing modules, the base plates are fixed to the floor using anchor bolts. The fixing material and shims for height compensation of 2 cm are included in the scope of delivery.The roadway module is a construction made of support profiles and sheet metal flame-cut parts that are welded together to form a composite structure. The bridge decks are bolted to the weighing modules and thus form a 950 mm wide deck on each side of the scale.Maintenance openings on the sides allow easy access to the load cells and load application points after installation, making maintenance simple.The lanes and ramps are painted with a primer and top coat (azure blue), the weighing module is hot-dip galvanized. Order processingOrder processing includes in particular Order clarification, order management, system configuration, system integration and testing of the scope of delivery in our company, Arrangement and reservation of the calibration date, Provision of the calibration vehicle for adjustment and calibration.The complete system is set up and tested by Essmann Waagen. All devices are fully configured. The system is set up according to the requirements.Installation and commissioningInstallation and commissioning include Delivery of the complete scale free to the installation site, Assembly of the scale, installation of the device, device connection, Device and system test, Adjustment and manufacturer's calibration of the scale, Instruction in operation following device installation and trial operation. Not included in the scope of delivery and services: Any necessary leveling of the paved, concrete or asphalt surface if it is uneven and has height differences (required ground pressure = 14 kg/cm², max. height deviations = +/- 2 cm). Provision of a forklift truck or similar with driver (load capacity min. 1000 kg) for unloading and installing the scales. Delivery and laying of the protective conduits (incl. pull wire) for the measuring, signal and data lines between the devices. Delivery and laying of the measuring, signal and data lines for distances over approx. 20 m, network connections (active/passive) and installation inside buildings. Connection of 230 V supply voltage to the devices.If you need assistance with project planning, please contact us. We take sufficient time for consultation and every individual request in order to find a solution tailored to your needs.You can reach us by telephone on: +49 40 84 000 410 Monday - Friday: 08:30 - 17:00 by e-mail at: [email protected]

HighlightsWith 4x ramps, incl. delivery, assembly and calibration of the scales. Technical DataType:HE-TS 06Bridge size: 6.00 x 3.00 mDrive-on height: < 300 mmLoad capacity: according to DIN 8119Maximum load: 30.00 tVerifiable weighing range: 0.2 - 30.00 tDigit increment: 0.01 tAccuracy, calibratable: Class III, ≤+/- 0.05 % F.S.Overload protection: 200 %Outdoor protection class: IP66 and IP68/IP69KOperating temperature range: - 40 ... +80°C The HE-TS electro-mechanical truck scale is a modular system with an extremely flat design and complies with DIN standards, the regulations of the Physikalisch-Technische Bundesanstalt (PTB) and the OIML recommendations. Scale constructionThe scale is a solid welded steel construction consisting of weighing, lane and four ramp modules.The total weight of the truck scale is very low, with the heaviest component weighing approximately 1000 kg. For this reason, the complete scale can be easily assembled using a forklift or telehandler. The scale is therefore ideal for mobile use or for use in hard-to-reach installation locations.The weighing module is a compact design consisting of two base plates connected by rectangular tubes. Two shock absorbers and two anti-lift devices are integrated into each weighing module. Two additional screws are provided for transport safety. The bumper system requires no readjustment and is wear-free.When installing the weighing modules, the base plates are fixed to the floor using anchor bolts. The fixing material and shims for height compensation of 2 cm are included in the scope of delivery.The roadway module is a construction made of support profiles and sheet metal flame-cut parts that are welded together to form a composite structure. The bridge decks are bolted to the weighing modules and thus form a 950 mm wide deck on each side of the scale.Maintenance openings on the sides allow easy access to the load cells and load application points after installation, making maintenance simple.The lanes and ramps are painted with a primer and top coat (azure blue), the weighing module is hot-dip galvanized. Order processingOrder processing includes in particular Order clarification, order management, system configuration, system integration and testing of the scope of delivery in our company, Arrangement and reservation of the calibration date, Provision of the calibration vehicle for adjustment and calibration.The complete system is set up and tested by Essmann Waagen. All devices are fully configured. The system is set up according to the requirements.Installation and commissioningInstallation and commissioning include Delivery of the complete scale free to the installation site, Assembly of the scale, installation of the device, device connection, Device and system test, Adjustment and manufacturer's calibration of the scale, Instruction in operation following device installation and trial operation. Not included in the scope of delivery and services: Any necessary leveling of the paved, concrete or asphalt surface if it is uneven and has height differences (required ground pressure = 14 kg/cm², max. height deviations = +/- 2 cm). Provision of a forklift truck or similar with driver (load capacity min. 1000 kg) for unloading and installing the scales. Delivery and laying of the protective conduits (incl. pull wire) for the measuring, signal and data lines between the devices. Delivery and laying of the measuring, signal and data lines for distances over approx. 20 m, network connections (active/passive) and installation inside buildings. Connection of 230 V supply voltage to the devices.If you need assistance with project planning, please contact us. We take sufficient time for consultation and every individual request in order to find a solution tailored to your needs.You can reach us by telephone on: +49 40 84 000 410 Monday - Friday: 08:30 - 17:00 by e-mail at: [email protected]

Mobile Vehicle Scale DTW1860A-9: Flexibility and Precision for Your Business Discover the Mobile Vehicle Scale DTW1860A-9, an efficient and accurate weighing solution that is perfect for versatile use up to 60 tons in your business. Its robust construction and quick setup save valuable time and increase your productivity. Application Scenarios of the Mobile Vehicle Scale DTW1860A-9 Transport and logistics companies: The DTW1860A-9 allows for quick weighing of vehicles on-site or at various locations. Construction industry: Optimize the load of your vehicles and avoid overloading at the construction site. Agriculture: Accurately monitor harvest and delivery weights directly in the field or on the farm. Features of the Mobile Vehicle Scale DTW1860A-9 up to 60 Tons Capacity: According to Directive 96/53/EC for European commercial vehicle transit. Construction: Nocked steel surface for optimal stability and measuring accuracy. Mobility: Easy transport and setup for versatile use. CE-M Certification: Ensures suitability for calibrated traffic. Corrosion Protection: Durable epoxy coating thanks to sandblasting and painting process. Accessories: Optional ramps for increased functionality and adaptability. Benefits of the Mobile Vehicle Scale DTW1860A-9 Precision with every weighing operation: Reliable measurements through high-quality materials and workmanship. Adaptation to needs: The availability of optional components allows for individual configuration. Longevity and Durability: Investment security through robust construction and high-quality corrosion protection. Easy Operability and User-Friendliness: Minimize training effort and maximize efficiency. Enhance the flexibility and precision of your weighing operations with the Mobile Vehicle Scale DTW1860A-9. Contact us for a consultation or to get a quote.

Mobile Vehicle Scale DINI DTW1460A-9 – Your Partner for Precise Weighing The mobile vehicle scale DINI DTW1460A-9 stands out for its precision and versatility. With a maximum load capacity of 60 tons and compliant calibration, it provides the ideal solution for industries such as recycling, road construction, and quarrying. Its compact design allows for easy transportability and quick setup, making it an indispensable tool for a variety of weighing tasks. Applications of the DINI DTW1460A-9 Vehicle Scale Industry: Use in recycling centers, on construction sites, and in quarries. Logistics: Weight determination for cargo control of commercial vehicles. Control: Monitoring compliance with European axle load regulations in the transport sector. Outstanding Features of the DINI DTW1460A-9 Vehicle Scale Construction: Durable, baked enamel steel and dimple-patterned steel sheet. Load Capacity: Withstands weights up to 60 tons. Modularity: Flexible length adjustment as required. Weighing Cells: Protection from water and dust for precise measurements. Interfaces: Comprehensive connectivity options including Bluetooth and Ethernet. Advantages and Strengths of the DINI DTW1460A-9 at a Glance User-Friendly: Easy transportation and quick setup thanks to a well-considered design. Cost-Efficiency: Time, space, and cost savings compared to conventional scales. Precision: Mandatory calibrated, reliable weighing results for business and industry. Adaptability: Individual expansion options and accessories for specific requirements. Service: Customer service and a 2-year warranty for your security and satisfaction. Boost the efficiency of your weighing processes with the mobile vehicle scale DINI DTW1460A-9. Let yourself be convinced by the robustness, reliability, and innovative features and contact us for a consultation or a customized offer. We look forward to supporting you with our expertise and high-quality products.

Mobile Vehicle Scale DINI DTW530A-9 up to 30 t - Precision Weighing for Industry and Mobility The DINI DTW530A-9 is the optimal mobile vehicle scale for businesses that value precision, flexibility, and reliability. Designed for industrial use in areas such as recycling, road construction, and in quarries, this scale is distinguished by its robustness and the simple possibility of changing locations. Easy to transport and constructed with high-quality materials, it represents a durable investment in your weighing system. Application Examples for the Mobile Vehicle Scale DINI DTW530A-9 Recycling Facilities: Fast and accurate weight recording of vehicles in the recycling process. Road Construction: Flexible location changes in road construction projects for straightforward weighing. Quarries: Robust and precise weight measurement of commercial vehicles under harsh conditions. Mobile Sites: Weighings at different locations without the need for complex installation. Product Features of the DINI DTW530A-9 Highest Precision: With a maximum load of 30 t and a verification scale interval (e) of 10 kg, precise weighing is ensured. Compact Design: At just 22 cm in height, it's inconspicuous and space-saving. Robust Materials: Durable construction with powder-coated steel and checkered steel plate. CE-M Verification: Standard version comes with CE-M verification as standard for legal compliance weighing. Versatile Interfaces: RS-232, RS-485, I/O, Profibus, Profinet, Ethernet, and Bluetooth connectivity. User-friendly Evaluation Device: Dini Argeo 3590ET with touchscreen for intuitive operation. Summary of the Benefits and Strengths of the DINI DTW530A-9 Efficiency Increase: Quick assembly/disassembly and minimal installation space save time and costs. High Load Capacity: Suitable for heavy utility vehicles up to 30 t total weight. Flexibility: Portable design ideal for sites with changing measurement requirements. Economical: Long-term investment in a high-quality weighing system. Experience the benefits of the mobile vehicle scale DINI DTW530A-9 for yourself and ensure that your weighings are precise, fast, and uncomplicated. Contact us today to receive individual consultation or to place an order directly. Increase your productivity and secure your mobile solution for precise weight measurements!

DINI DTW930A-9 Mobile Vehicle Scale up to 30 t - Efficient Weighing Solution for Flexible Locations Choosing the DINI DTW930A-9 Mobile Vehicle Scale means opting for a highly precise measuring instrument that combines mobility, easy installation, and robust technology. Designed for flexible use on the road, this dual-platform vehicle scale stands out with its compact height of just 0.22 meters and lightweight construction, making it perfect for industries that require quick and space-saving weighing solutions. Application Scenarios for the DINI DTW930A-9 The variable deployment of the DINI DTW930A-9 encompasses diverse industrial sectors: Recycling Companies: Efficient weight recording and material control. Road and Civil Engineering: Precise determination of vehicle load masses. Quarries: Quick and accurate weighing of bulk goods. Event Management: Reliable weighing of event equipment at different locations. Technical Highlights of the DINI DTW930A-9 This vehicle scale up to 30 t stands out due to its sophisticated features: Robust Surface: A 9x1 m large load surface made of strong, dimpled steel sheet. Sturdy Construction: A construction made of powder-coated steel ensures durability. Precision Weight Measurement: Oscillating load carriers for accurate weight documentation. Safe Operation: Integrated safety mechanisms for compensation of braking and acceleration. Flexible Power Supply: Battery operation allows use in locations without direct power availability. Connectivity: Various interfaces facilitate networking and data transfer. Certification: Calibratable according to CE-M for 3000e with factory calibration from the manufacturer. Protected Design: Protection classes IP65 and IP68 keep the display and platform safe from external influences. Why the DINI DTW930A-9 Is Your Best Choice The DINI DTW930A-9 sets standards in terms of efficiency and user-friendliness: Maximum Precision: Highest measurement accuracy for reliable weight determinations. Economy: Time and cost savings compared to stationary weighing systems. Universality: Versatile use across diverse industry segments. Operating Comfort: An innovative touchscreen display with intuitive menu navigation. Flexibility: Uncomplicated setup and mobile power supply allow deployment at almost any location. Safety and Durability: Top-quality materials and protection classes for longevity under demanding conditions. Seize the opportunity and equip yourself with the DINI DTW930A-9 mobile vehicle scale for a future-oriented and flexible weight recording. Order now and immediately enhance the effectiveness of your weighing processes!

DINI DTW515A-9 Portable Vehicle Scale - Precise and Flexible Weight Measurement Ensure maximum precision in weight measurement with the DINI DTW515A-9, the portable vehicle scale up to 15 tons for a wide range of industrial requirements. With its sturdy construction and cutting-edge technology, it's the ideal tool for industries such as recycling, highway construction, or quarries to name just a few. The scale guarantees quick and accurate measurements, which are essential for efficient operational processes and correct billing. Applications of the DINI DTW515A-9 Recycling plants: Accurately determine the weight of scrap and recyclable materials to enable transparent and fair billing. Road builders: Safely monitor and document the weight of materials like gravel or asphalt, to protect your staff and equipment. Quarries: Optimize your logistics by precisely measuring the weight of large stones – for efficient transportation and cost savings. Features of the DTW515A-9 Mobile Vehicle Scale up to 15 Tons Compactness: Space-saving design with a low profile of just 22 cm allows for the scale to be installed flexibly and at almost any location. Material Quality: Durability and reliability thanks to the use of high-quality materials in its manufacturing. Easy Assembly: A very simple setup without a lot of time or cost is ensured by the well-thought-out conception of the DTW515A-9. Official Calibration: This scale is equipped with CE-M calibration for 3000e and is thus approved for commercial use – a sign of its highest accuracy and reliability. Benefits and Strengths of the DINI DTW515A-9 at a Glance Reliable Measurement Results: With the DINI DTW515A-9, you can rely on a product that delivers the most accurate measurement data and supports your company in complying with relevant regulations. Boost in Efficiency: The practical design and ease of use of the scale contribute to a significant reduction in time, space, and costs. Investment Security: Due to its high-quality construction and regulation-compliant calibration, you are investing in a permanently usable and reliable measuring instrument. Choose the DINI DTW515A-9 today and experience how smooth and precise weighings can improve your business routine. Our consultants are happy to assist you and will find the best solution for your requirements together with you. Request a consultation now!

Mobile Vehicle Scale DINI DTW960A-9 - High-Precision Weighing Technology for a Variety of Applications Maximize your efficiency in handling transport weights: The Mobile Vehicle Scale DINI DTW960A-9 represents innovative weighing technology that combines mobility and precision. Whether on construction sites, in agricultural operations, or in the logistics sector – this vehicle scale delivers reliable measurements up to 60 t in all environments and is perfect for flexible use. Possible Applications of the DINI DTW960A-9 The Mobile Vehicle Scale DINI DTW960A-9 can be universally applied across sectors: Transport and logistics sector: For rapid weight capture of trucks and delivery vehicles in real-time. Waste management industry: Ideal for recycling and waste management companies to correctly weigh garbage trucks. Construction industry: An indispensable tool for weighing construction materials on-site. Agriculture: Precision in livestock and harvest weighing for optimized resource management. Highlights and Technical Specifications of the DINI DTW960A-9 The Mobile Vehicle Scale DINI DTW960A-9 for up to 60 t impresses with its key features: Construction: Modular design with reinforced ramps for ease of driving on and versatility. Material Quality: Durable steel plate construction and water- and dust-protected weighing cells. Calibration: Immediately operational due to standard calibration and compatibility with numerous weighing indicators. Easy Installation: Intuitive setup and takedown with a simple connector system for maximum mobility. Flexibility: Expandable with special components and equipment according to customer requirements. Connection options: Generous included accessories such as a 30m connection cable for various indicators. Your Benefits with the DINI DTW960A-9 Vehicle Scale Investing in the DINI DTW960A-9 pays off with a variety of benefits: Time and cost savings: Quick commissioning and high measurement accuracy reduce operational costs. Flexible Use: Thanks to the independence from fixed locations, the scale can be used wherever it is needed. Reliability: Robust construction and protective class of the weighing cells ensure longevity and precise measurements. Expandability: Modularity and compatibility with a wide range of indicators allow for customized adjustments. Opt for flexibility and precision with the DINI DTW960A-9 Vehicle Scale. Our service team is happy to advise you on individual configurations and options. Contact us today to maximize your processes.

DINI DTW1430A-9 Mobile Vehicle Scale - Industrial Precision Weighing Technology Are you looking for a mobile weighing solution that combines flexibility and precision for industrial applications? The DINI DTW1430A-9 vehicle scale is specifically designed for mobile use up to a maximum load of 30 t and delivers powerful performance to meet your needs in areas such as construction, quarries, and the recycling industry. Application Examples for the DINI DTW1430A-9 The wide range of uses for the DINI DTW1430A-9 underscores its versatility in various industrial areas: Recycling plants: Enables quick weighing of vehicles even on uneven terrain. Road construction: Ideal for construction sites to determine load weights. Quarries: Sturdy construction for rough working environments and heavy loads. Product Features of the DINI DTW1430A-9 The DINI DTW1430A-9 benefits from several innovative features that make it a top choice: Durable surface: A load area made of ribbed steel plate ensures durability under heavy conditions. Easy transport: Thanks to its low height and reduced weight, easy transfer between sites is possible. EU compliance: Meets Directive 96/53/EC for use in the European traffic area. Load capacity: Can measure weights up to 30 tonnes with a division of just 10 kg. Versatility: Effortless operation with a touchscreen and a variety of connection options. Advantages of the DINI DTW1430A-9 Mobile Vehicle Scale The DINI DTW1430A-9 stands out from other vehicle scales with the following advantages: Superior precision: Standard calibration and Class III accuracy guarantee precise weight determination. Easy installation: Modular design and simple transport allow for quick commissioning and effective use. Custom adaptability: A comprehensive selection of accessories and options allows the scale to be tailored to specific needs. Secure your DINI DTW1430A-9 Mobile Vehicle Scale now for optimal weighing results. Use the form to make your inquiry and have a tailored offer created for you. Our experts are ready to provide you with the best possible advice.